0
all-about-washing-machines-tumble-dryers.com-logo
0
Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA

DREHFLEX - 2 pieces motor carbons/carbon brushes for brine motors - in different washing machines - incl. holder - fits 400602015-2 4006020152 02333540 481281719419 481236248445

Price: £14.60
Product prices and availability are accurate as of 2019-09-21 19:15:36 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Motor carbons

for manufacturers:
Electrolux Group (AEG Electrolux Juno Zanker Zanussi etc.)
Source group (source Privileg Matura etc.)
Whirlpool Group (Bauknecht Ignis Philips Whirlpool Ikea etc.)
and other manufacturers where the dimensions have been installed

for device:
washing machine / tumble dryer

Article description:
motor carbon / motor brushes / carbon brushes / motor grinders

Motor carbons for brine motor

for part no.
Electrolux Group
400602015-2 // 4006020152
Quelle group
02333540 // 2333540
Whirlpool Group
481281719419
replaced 481236248445, 481281729603, 481236248442

possible inscriptions on the engine
(you will find this information on your engine - then these are the suitable coals)

20584.087 / 20544.080 / 20584.453 / 20584.084 / 20584.513 / 20584.514
20584087 / 20544080 / 20584453 / 20584084 / 20584513 / 20584514

Data:
construction
Carbon brushes incl. holder
ground diagonally
special feature: lateral connection lug

Dimensions (mm)
B = 13mm
D = 4,9mm
L* = 34mm
A = 4,8mm
Length of the sleeve= 54mm

L* = length of carbon required = length of bracket less 10-15mm (for spring)

Dimensions:
approx. 13 x 4.9 x 34 mm - connecting lug 4.8 mm
Holder total length 54mm
replaces green version

only for devices with brine motors
to note:
Always pay attention to the motor manufacturer & dimensions - different motors can be used under one spare part number.

Product Features

possible inscription on the engine (if you find one of these details on your engine - then these are the suitable carbons): 20584.087 20544.080 20584.453 20584.084 20584.513 20584.514 20584087 20544080 20584453 20584084 20584513 20584514 suitable for the following part no.: Electrolux group 400602015-2 // 4006020152 Source group 02333540 // 2333540 Whirlpool group 481281719419 Dimensions: approx. 13 x 4.9 x 34 mm - connection lug 4.8 mm Holder total length 54 mm replaces green version // only to be observed for devices with brine motor or ZEM motor: Always pay attention to the motor manufacturer & dimensions - different motors can be used under one spare part number. Abmessungen: ca. 13 x 4,9 x 34 mm - Anschlusslasche 4,8 mm Halter Gesamtlänge 54 mm ersetzt grüne Version // nur zu beachten bei Geräten mit Sole- oder ZEM-Motor: Achten Sie immer auf den Motorenhersteller und die Abmessungen - verschiedene Motoren können unter einer Ersatzteilnummer verwendet werden. we recommend to contact the seller in case of uncertainties regarding the accuracy of fit by means of the data on the type plate in order to avoid wrong sales

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software